PCB Tools by kennycoder
Stencil
Enclosure
Solder Paste Gerber File (Required)
Layers to export for Gerbers
• F.Paste (front paste stencil)
• B.Paste (back paste stencil)
Board Outline Gerber (Optional)
Upload this to automatically crop and generate walls.
Layers to export for Gerbers
• Edge.Cuts (board outline)
Stencil Height (mm)
DPI
Wall Height (mm)
Wall Thickness (mm)
Convert to STL
Board Outline Gerber (Required)
Layers to export for Gerbers
• Edge.Cuts (board outline)
PTH Drill File (Optional)
Component through-holes (vias auto-filtered).
Layers to export for DRL
• Use the
PTH
file (Plated Through-Hole)
• Vias are automatically filtered out
NPTH Drill File (Optional)
Mounting holes — become pegs in enclosure.
Layers to export for DRL
• Use the
NPTH
file (Non-Plated Through-Hole)
• These become alignment pegs
F.Courtyard Gerber (Optional)
Component outlines — used for lid cutouts.
Layers to export for Gerbers
•
F.Courtyard
(front courtyard)
• ☑ Exclude DNP footprints in KiCad plot dialog
• Cutouts generated where components exist
F.Mask Gerber (Optional)
Soldermask openings — minimum pad cutouts.
Layers to export for Gerbers
•
F.Mask
(front soldermask)
• Shows exact pad areas that need cutouts
• ☑ Exclude DNP footprints in KiCad plot dialog
PCB Thickness (mm)
Wall Thickness (mm)
Wall Height (mm)
Clearance (mm)
Gap between PCB edge and enclosure wall.
DPI
Generate Enclosure
Processing... This may take 10-20 seconds.