7a8,9
> #define AD5940ERR_STOP 10
> 
30c32
<   .RcalVal = 100.0,         /* Calibration Resistor Value (Ohms) */
---
>   .RcalVal = 100.0,           /* Calibration Resistor Value (Ohms) */
71a74
>   .ShortRe0Se0 = bFALSE,
79,82c82,85
<  * @brief Configures the Impedance Sweep parameters.
<  * @param start Start Frequency in Hz
<  * @param stop Stop Frequency in Hz
<  * @param ppd Points Per Decade (Resolution)
---
> * @brief Configures the Impedance Sweep parameters.
> * @param start Start Frequency in Hz
> * @param stop Stop Frequency in Hz
> * @param ppd Points Per Decade (Resolution)
315a319,328
> 
>   // Handle RE0-SE0 Short (SW11 in LPTIASW0)
>   if(AppIMPCfg.ShortRe0Se0 == bTRUE)
>   {
>       AD5940_SEQGenInsert(SEQ_WR(REG_AFE_LPTIASW0, 0x00000800)); // Close SW11
>   }
>   else
>   {
>       AD5940_SEQGenInsert(SEQ_WR(REG_AFE_LPTIASW0, 0x00000000)); // Open all LPTIA switches
>   }
625c638
<       return AD5940ERR_OK;
---
>       return AD5940ERR_STOP; // Return STOP code
755c768,769
<           if (AppIMPRegModify(pBuff, &FifoCnt) == AD5940ERR_OK) 
---
>           int32_t status = AppIMPRegModify(pBuff, &FifoCnt);
>           if (status == AD5940ERR_OK) 
782a797,798
>           
>           if (status == AD5940ERR_STOP) return AD5940ERR_STOP;